The Rotovac 360i comes with the versatility to clean multiple types of flooring with one machine. It is able to do this with its interchangeable heads.
BONNETS & BUFFING
| CARPET | |
 |
Triple Head – The standard head that accompanies the machine. It has 3 solution spray jets and the 3 Swoop GlideTM vacuum slots to prevent over spray while cleaning. |
 |
Quad Head – The same as the triple but with 4 jets and vacuums. |
 |
15 inch Quad Head – A larger version of the original. It has a shroud that allows it conform to the tool’s base for a wider cleaning path. |
| SPOTTING | |
 |
Stain Cleaning Head – 7 inches wide. This head focuses the cleaning power into a smaller area to remove stains and extreme soiling. |
 |
Extraction Head – For extra agitation on very dirty carpets. It has a scrubbing brush along with 3 vacuums and jets. |
| HARD FLOORING | |
 |
Tile and Grout Head – A scrubbing head with 3 pressure wash jets. This will clean tile while the vacuum ring removes spent solution. |
 |
Grey Grit Head – For vinyl, VC and soft stone. |
 |
Black Grit Brush – For concrete scrubbing. |
 |
Bonnet Block Head – Will allow the use of any bonnet with the 360i. This works for buffing, dry cleaning and more. |
 |
Premium Bonnet Pad – For carpet cleaning and floor buffing. |
 |
Diamond Dust Pad – For removing scratches. This pad leaves beautiful, scratch-free surfaces when used on natural stone floors. It can also be used with a vacuum ring to remove dirt and solution. |
 |
Cleaning & Polishing Pad – For cleaning and scrubbing. These pads are for hard floors and are available in different types that go from light cleaning to floor stripping. |