Injectidry Drying Equipment

SKU: 87f855cf6d96 Categories: ,

Description

Since 1996, Injectidry has provided professionals with this industrial blowing system to dry out interior walls and ceilings of flood damaged homes. This system is the best you can buy; it works on walls and floors of nearly any material and enables you to dry them out without having to remove them. With lots of power and quality construction, this machine will restore even large houses in a matter of days before the water has time to do its damage.

The HP60 blower is housed in medium density polyethylene so it will not rust or dent. Inside you will find an industrial regenerative blower motor which can be used for either negative or positive drying. This blower gives you 103 CFM and 60 inches of static lift. It is good for 20,000 hours or more which means it will last you the next 10 years.

Setup and use of the HP60 are simplified to make your job smoother. The blower house has clearly marked ports that match the marked hoses. Quick connects tip the ends of everything so you don?t waste time when preparing to work. The hoses connect to injectors that have molded wings to hold them in place while the machine is in use. These injectors come in 2 different, color-coded sizes. The blue injector moves twice the air of the black one and will allow you to concentrate more air into wetter areas.

Your wall and ceiling drying package comes with everything you need to set it up and start restoring homes.

It includes the following:

  • 1 HP60 blower
  • 1 Main air in quick connect and main air out quick connect, installed
  • 1 Carry bag and rolling duffel bag
  • 12 Active hose lines, each with 2 cuffs and 1 quick connect
  • 1 Main air out hose and main air in hose with factory set PRV and quick connect tee
  • 10 Quick connect manifolds
  • 3 Hose connectors
  • 2 Small tees
  • 10 Hose cuffs
  • 4 End cap plugs
  • 50 Tubing connectors
  • 50 Stoppers
  • 170 Wall injectors
  • 1 50 foot safety blank hose (can be cut to needed length)
  • 2 200 foot safety tubing (cut to needed lengths)

It is highly recommend to add 2 optional accessories to your set. The silencer keeps the noise down while your blower works and can be attached to the machine for safety. The inline interceptor filter has a dual filtration system that keeps dirt, allergens and other contaminants from damaging the blower.

Please Call to Place an Order
1-800-CHEM-TEX or 713-668-1212