Navigation

Carpet Repair Tools

Carpet Seaming Rollers
By using these Gundlach carpet seaming rollers, they help you apply pressure to the carpet backing to help ensure a good bond with the hot melt adhesive. The rollers have star metal wheels and washers. This allows the tool to be heated with a torch and run over scrap carpet to be cleaned.		 3″ Grooved Teflon® Iron
The grooved bottom on the iron helps to prevent adhesive from being squeezed out and also leaves it in an “up” position for a better transfer to the carpet backing. The Teflon® coated base of the iron permits fast, easy cleanup. The thermostat control has four heat settings, gives a temperature range of 135°F – 425°F and is located above the carpet level for easy adjustment. The indicator light goes off to signal that your desired temperature has been reached.
Scissors/Carpet Shears
Light gauge shears for napping cuts. These Gundlach carpet shears are made entirely in the U.S.A. They are made of high integrity cutlery steel, hardened and tempered for durability and long life. The shears have been plated for protection against rust and corrosion.		 Duckbill Napping Shears
The off set handles on these Gundlach makes level nap trimming easy. The handles have a vinyl coating for your comfort. The #166 shears has 1″ knuckle room finger loops for the thumb and forefinger.
Push-Button Slotted Razor Knife
Opens in seconds with a push. There are no screws or no threaded fasteners of any kind used for opening or closing		 Carpet Knife
This Gundlach knife uses only a single clamping screw for quick blade changing. The aluminum knife has a polished, slim profile which means it won’t hang up on carpet yarns. Extra blades can be stored in the handle.		 Aviation Snips
* Powerful leverage allows easy metal cutting
* Serrated blades prevent slip-out
* Cut notches, shallow curves or straight cuts
* Vinyl covered handles for comfort.
Heavy Duty Blue Tempered Slotted Razor Blades
These heavy duty .017″ gauge blades are blue tempered for long cutting life. Each blade has rounded edges and are individually wrapped for safety.		 Cookie Cutter Stair Tool
This tool is used for tucking carpet into the tackless strip/wall gully and to drive the carpet into the stair seam. Made of alloy steel and nickel plated to resist rust and corrosion. 8″ in length, 2 7/8″ Wide
Seaming Tape Glue Gun Glue Sticks
Tape Measure Carpet Tractor
This Gundlach carpet tractor can be used on all types of carpet. The rollers have star wheels. The tool weighs 2 lbs and measures 3″ W x 6 1/2″ L x 2 1/2 H.

 

Cookie Cutter Replacement Blades
Utility Knife w/ 5 Blades COMPLETE! Carpet Repair Kit
This money saving package includes a heavy duty tool box, knee kicker, seaming iron, glue gun, glue sticks, stair tool, seaming tape, push-button knife, box of blades, extra knife, cookie cutter, extra cookie cutter blades, carpet shears, aviation snips, hammer, rubber mallet, cushion back cutter, large carpet tractor, scissors, utility knife and utility blades. This is everything that you will need to start carpet repair and installation.